树莓派安装 OpenMediaVault 4.0

📅 5月12日 / 🎨 开发日志 / 👓 14


OMV4 的树莓派官方镜像

官方镜像地址:OMV_4_Raspberry_Pi_2_3_3Plus.img.xz

我已经离线到了 百度网盘
提取码:zsqs

可以在下载页面中看到一份简单的说明:

OpenMediaVault 4 for Raspberry Pi 2B, 3B and 3B+

Do not decompress but write the .img.xz image in a single step using Etcher
to SD card: https://etcher.io

On first boot the installation will be finished. REMAIN PATIENT PLEASE since
this can take up to 20 minutes with a slow SD card and slow internet
connection (needs internet access to update all packages to latest version).
After one automatic reboot SD card activity led stops blinking and then your
Raspberry Pi is ready!

  - openmediavault-flashmemory plugin preinstalled to reduce wear on SD card.
  - ssh keys are generated on first boot
  - OMV Arrakis
  - Ships with 4.9 kernel that will be updated to latest available version
    at first boot (4.14.30 starting in March 2018)
  - not based on Raspbian but Debian/armhf (only compatible to RPi 2 or 3)
  - SSH keys are regenerated on first boot but SSH login has to be
    enabled in web UI prior to usage: Services --> SSH --> Permit root
    login
  - Please immediately change default passwords!
  - A third partition for data use will be automatically resized on first
    boot but you have to format it manually with the fs of your choice!
  - By default on RPi 3 B+ Fast Ethernet will be used to prevent hassles
    with bad cabling and under-voltage (Gigabit Ethernet increases the
    consumption). At the time of this writing Gigabit Ethernet on RPi 3+
    is broken anyway.
  - All details: https://forum.openmediavault.org/index.php/Thread/23065
    and https://forum.openmediavault.org/index.php/Thread/18991 (OMV 3)

web interface:
  - username = admin
  - password = openmediavault

console/ssh:
  - username = root
  - password = openmediavault

截取几个重要的点:

  1. 下载后的 .img.xz 包不要解压,直接用 etcher 这个软件刷入 TF 卡中即可
  2. web 管理帐号密码分别为 adminopenmediavault
  3. ssh 帐号密码是 rootopenmediavault

重点

可能会出现的问题:

  1. 安装后可能会发现 web 页面上不去(默认端口80有问题)
  2. 还可能发现远程 root 帐号无法登录(默认不允许登录)

这时候需要做的:

  1. 给树莓派接上显示器和键盘,进去使用 root 帐号登录(登录成功后会要求更改密码)
  2. 更改完成后,输入 omv-firstaid 启动修复程序,更改 web 页面端口号
  3. 此时可以登录到 web 管理页面中去,打开 root 帐号的远程登录权限

参考

(完)

留言(0)